Out of Stock

Product Description

Scratches are not limited to just coins and key either. We have tested ABRADE SAFE™ with other hard substances like screw driver, knife, surgical blades and writing pens. We would not recommend you to get your device in contact with dirt and sand particles. 
Scratch Resistant LCD Touch Spray-Coating for all Smart Phones and Tablets

LIFE SPAN              : Lasts for 6 months

PRODUCT EXPIRY: Best before 18 months from manufacturing

COVERAGE           : Coats 2-3 Phones / 1-2 Tablets

  • After using ABRADE SAFE, keep the spray bottle airtight.
  • Protects screen from scratches caused by blades, knife, keys etc.
  • Protects screen from harmfull UV rays from sun
  • Chemical resistant coating protects screen from bacteria and germs
  • Electronic friendly coating does not affects the electricals of the device
  • Easy to apply process coats your device in 10 minutes



How to Apply?

Step 1

  • Power off your device. 
  • Remove sim tray, back cover & battery (if possible). 
  • Clean complete device from outside with provided alcohol wipes. 
  • Clean your battery, sim tray, back & all ports with provided lint free cloth including all corners until it is dirt & smudge free. 

Step 2

  • Take the SPLASH SAFE™ spray bottle & shake well. 
  • It is electronic friendly & never voids manufacturer warranty. It will not even harm your fingerprint sensor button. 
  • Spray in all the ports, slim slots, buttons and all the tiny corners from where the water can enter and use our provided brush for brushing all these areas thoroughly. 

NOTE: Do not spray directly on the ear piece and speaker; just brush them by applying SPLASH SAFE™ on the bristles of the brush. 

  • Spray on entire screen, battery, back cover, camera lens and on the back after removing the battery (if possible) and spread it in a circular motion with our provided lint free cloth for coating thoroughly & evenly. 
  • Keep the phone in room temperature for 10 minutes to get the coating dry. 
  • Do the same process for the final time & now wait for six hours to get the coating dry completely. 
  • Do not insert the sim tray in sim slot till the 6 hours of coating.   
  • Use the lint free cloth to buff away excess coating to a gleaming finish. Buff using a circular motion. 
  • You can use your device after 6 hours of final coating but do not get your device in contact with any type of liquid for at least 24 hours. 

Step 3

  • Now your device is coated with SPLASH SAFE™. 
  • The buttons of your device may get hard after the coating but do not panic; they will start functioning normal within a day of usage. 
  • Your device is now safe from any type of liquid spills, splashes and rain. 


Vendor Information

2 reviews for Scratch Resistant Spray

  1. 5 out of 5


    Best for those who use there phones on regular bases

  2. 1 out of 5


    I want to know in details about scratch spay for mobiles

Add a review

Your email address will not be published. Required fields are marked *

Secure Shopping

Secure Shopping

Payment Options

Payment Options
© 2018. Tectotron Private Limited. All Rights Reserved